S-5!® clamps complement metal standing seam roof systems by providing a dependable way to attach things without jeopardizing the integrity of the roof. Their versatile, simple design and ample size make the standard-sized S-5! clamps so strong, they are perfect for snow retention products and all other heavy-duty applications. S-5! mini clamps also have incredible holding strength, providing exceptional value and performance for medium-duty applications. With the patented round-point setscrews, S-5! clamps will neither pierce the metal roof paneling, nor violate roof manufacturer warranties.
S-5-V and S-5-V Mini
The S-5-V clamp is a versatile clamp that fits vertical-folded seam profiles manufactured in North America—including most structural and architectural profiles. Its simple design and generous dimensioning are what make the S-5-V clamp so versatile for use with the S-5!® snow retention products, such as ColorGard®, as well as with other heavy-duty applications.
S-5-H90 and S-5-H90 Mini
The S-5-H90 is a one-piece clamp that was developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam greater than 0.65".
S-5-U and S-5-U Mini
The S-5-U clamp is by far the most popular and most versatile clamp. It will fit about 85% of the standing seam profiles manufactured in North America — including most structural and architectural profiles. It can be used on vertically oriented seams, and by rotating the clamp 90 degrees, it can also be used on most horizontal 2” seam profiles. Its simple design, generous dimensioning and multiple hole orientations are what make it so versatile for use with S-5!® snow retention products and other heavy-duty applications.
S-5-S and S-5-S Mini
The S-5-S clamps are extraordinarily versatile clamps, specifically created for popular snap-together standing seam profiles. The S-5-S or S-5-S Mini can be used to avoid having to crimp-seam profiles such as Firestone UC4 and New Tech Machinery SS550 and SS675. They also accommodate horizontal seams where the horizontal projection is under 0.54 inches without the need to double fold the seam!
S-5-E and S-5-E Mini
The S-5-E clamp is designed specially for double-folded standing seam roof profiles having the appropriate dimensioning. This clamp is also the one recommended for Butler’s MR24™. Although a bit smaller and less expensive than the S-5-U, for these profiles, the S-5-E is just as strong.
S-5-N and S-5-N Mini
S-5-N and S-5-N Mini clamps were designed with patented S-5!® zero-penetration technology for application on the popular 1" nail strip metal roof profiles and roofing types with similar profiles. The clamp boasts a wider throat that accommodates most nail strip profiles, minimizing the need to field crimp. An angled wall with a nose permits the S-5-N to engage the triangle type profiles during the installation process—there is no longer a need to hold the clamp in place while setscrews are tensioned. The combination of these two features allows the clamp to sit straighter on the seam.
S-5-N-1.5 and S-5-N-1.5 Mini
S-5-N 1.5 and S-5-N 1.5 Mini clamps were designed with patented S-5!® zero-penetration technology for application on the popular 1.5" nail strip metal roof profiles and roofing types with similar profiles. (Please note these clamps were not designed to fit all nail strip profiles.) The clamp boasts an angular throat that accommodates most nail strip profiles, minimizing the need to field crimp. An angled wall with a nose permits the S-5-N 1.5 to engage the triangle type profiles during the installation process—there is no longer a need to hold the clamp in place while setscrews are tensioned.
S-5-T and S-5-T Mini
The S-5-T clamp is specially developed to fit profiles having a “T” shaped seam configuration. It will also work on architectural “single-fold,” or “angle-seam” profiles having a horizontal projection of 5/8” or less. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam.
S-5-Z and S-5-Z Mini
The S-5-Z clamp is specially developed to fit profiles having a round “bulb” seam configuration. Its two-piece design allows it to be easily installed anywhere along the length of the rib. The S-5-Z is perfect for S-5!® snow retention products and other heavy-duty applications.
S-5-Q and S-5-Q Mini
The S-5-Q clamp was specifically developed to accommodate metal roof panels having a large, round “bulb” seam configuration up to 29 mm. It will also fit smaller bulb-shaped profiles that were not seamed correctly, allowing the seam to be utilized without modification.
S-5-H and S-5-H Mini
The S-5-H clamp was specifically developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam. The S-5-H is unique in that it allows for attachment to a horizontal seam on the vertical leg of the seam.
S-5-B and S-5-B Mini
Architects and roof designers choose copper roofing for its timeless elegance and durability. The S-5-B (“B” for “Brass”) allows architects to maintain that theme with all equipment and accessories that must be mounted to the roof with permanence and durability consistent with the roof itself.
This clamp is specifically designed for double-folded copper standing seam paneling and batten profiles